TASK: This Range Rover had a small dent and scuff through the paint on the rear quarter panel and also some scuffing on the adjacent bumper. The area was cleaned and degreased ready for work to commence. The dented area was prepared for a fine layer of filler. once the dent had been repaired the…
TASK: The owner of this Porsche Cayenne came to us with vandal scratch damage along the whole side. Because of the number of panels involved in this repair, 2 panels were repaired at a time. The scratches were repaired and the vehicle masked up ready for the professional application of a 2 component primer. Once…
TASK: This Porsche Cayenne had a creased dent to the rear quarter and adjacent rear door. Special pins were welded to the metal enabling the dent to be removed as much as possible. The dents were then leveled off with a fine layer of filler to provide a flat surface for the following 2 component…
TASK: This Maserati had a scratch through the paint on the rear quarter. The scratch damage was repaired and vehicle masked ready for application of a 2 component primer. Once the primer had been cured, it was sanded flat ensuring a perfect surface for the following professional application of base coat and lacquer. After the…
TASK: This Citroen had a large dent on the drivers side front wing. The first steps were to remove the wheel arch trim so access to the rear of the dent could be gained. The dent was then pushed out using various techniques, Ready for a fine layer of filler to completely level the dent.…
TASK: This Chrysler 300C had suffered a dented wing and the front bumper had been scuffed and un clipped. Pins were welded on to pull the line of the wheel arch back into shape and the dent was removed as much as possible. A fine layer of filler was then applied and sanded flat to…
TASK: This Audi A3 had a large crack to the rear bumper. The first step was to glue the crack from behind back together and then it could be plastic welded from the front and reinforced with alluminium mesh. Once the crack had been repaired, the vehicle was masked ready for application of a 2…
TASK: This Bentley Continental had suffered a minor scuff to the rear bumper corner. The damaged area was repaired and a 2 component primer applied. This was then cured using infra red. Once cured the primer was sanded to leave a level surface for the following application of base coat and lacquer which was blended…
