This Citroen had a large dent on the drivers side front wing.

The first steps were to remove the wheel arch trim so access to the rear of the dent could be gained.

The dent was then pushed out using various techniques, Ready for a fine layer of filler to completely level the dent.

Once completely flat the vehicle was masked and a 2 component primer was applied and cured.

The new primer was then sanded to further level out the surface and then the base coat and lacquer were professionally applied.

Once the final layer of lacquer had cured any minor dust particles were removed and then machine polished back to a high gloss.

The total time for this repair was approximately 4 hours.