This Chrysler 300C had suffered a dented wing and the front bumper had been scuffed and un clipped.

Pins were welded on to pull the line of the wheel arch back into shape and the dent was removed as much as possible.

A fine layer of filler was then applied and sanded flat to completely level out the dent and restore shape to the wing.

The bumper was the refitted and the scuff damage repaired.

The vehicle was then masked and a 2 component primer applied and cured.

This primer was then sanded flat ready for the following professional application of base coat and lacquer.

Once the final coat of lacquer had been cured, any minor dust particles were removed and then machine polished back to a high gloss finish.

The total time for this repair was approximately 6 hours.