TASK: Our client came to us with this Bentley Continental, that had suffered from a cracked front bumper and slight denting to the front wing. The wheel arch area was stripped down to gain access to bumper attachments and to repair the dents to the wing. The cracked bumper was prepared and plastic welded using…
TASK: This Porsche 911 had a dented and cracked rear bumper corner from a low speed collision. The first stage was to heat the bumper up to a specific temperature in order to be able to restore its natural shape without stretching the plastic. Once this stage was complete, the crack was plastic welded and…
TASK: This Mercedes E Class required the dented and scuffed front bumper to be repaired. The first stage was to heat the bumper to a specific temperature in order to be able to restore the shape without stretching the plastic. Once the shape was correct, a fine layer of special flexible bumper filler was applied…
TASK: This Audi A3 had a large crack to the rear bumper. The first step was to glue the crack from behind back together and then it could be plastic welded from the front and reinforced with alluminium mesh. Once the crack had been repaired, the vehicle was masked ready for application of a 2…
TASK: This Bentley Continental had suffered a minor scuff to the rear bumper corner. The damaged area was repaired and a 2 component primer applied. This was then cured using infra red. Once cured the primer was sanded to leave a level surface for the following application of base coat and lacquer which was blended…
