TASK: This Porsche 911 C4S had some minor dents and scuffs to the lower wheelarch. The dents were filled and sanded to shape and vehicle masked ready for the application of a 2 component primer. This primer was cured and then sanded flat ready for the professional application of the pearlescent base coat and 2…
TASK: Our client came to us with this Bentley Continental, that had suffered from a cracked front bumper and slight denting to the front wing. The wheel arch area was stripped down to gain access to bumper attachments and to repair the dents to the wing. The cracked bumper was prepared and plastic welded using…
TASK: This Toyota had suffered a quite severe impact to the front bumper causing a dent and splitting the plastic. Once we had removed the dent and reshaped the bumper, the split was plastic welded back together to produce a durable repair Various stages were then carried out to prepare the bumper surface for base…
TASK: This Porsche 911 had a dented and cracked rear bumper corner from a low speed collision. The first stage was to heat the bumper up to a specific temperature in order to be able to restore its natural shape without stretching the plastic. Once this stage was complete, the crack was plastic welded and…
TASK: This Mercedes E Class required the dented and scuffed front bumper to be repaired. The first stage was to heat the bumper to a specific temperature in order to be able to restore the shape without stretching the plastic. Once the shape was correct, a fine layer of special flexible bumper filler was applied…
TASK: This Audi R8 had suffered from light scuffs on the rear bumper and rear quarter panel. The damaged area was repaired, panels prepped and vehicle was masked up to keep the vehicle free of any dust and over spray. A 2 component primer was applied and then dried using infra red. This new primer…
TASK: This Lamborghini had been maliciously damaged along both sides of the vehicle. The damaged was repaired, vehicle masked and a 2 component primer applied. The correct color was mixed up consisting of a white ground coat, solid yellow base coat and then a yellow pearl mid coat. Once these were applied and dried a…
TASK: A small stone chip down to the metal was spoiling this otherwise immaculate Maserati. The stone chip damage was repaired and wing prepped for painting. 3 coats of Nero Carbonio base coat were then applied and Lacquer applied and blended correctly to give a seamless transition from new to old paint. Once the lacquer…
TASK: Our client came to us with a couple of small but noticeable dents on the front wing of their VW Tiguan. The dents were removed with the use of welded on studs and then various stages were carried out to return the panel to original condition. The final top coats of lacquer were cured…
TASK: This Range Rover had a small dent and scuff through the paint on the rear quarter panel and also some scuffing on the adjacent bumper. The area was cleaned and degreased ready for work to commence. The dented area was prepared for a fine layer of filler. once the dent had been repaired the…
